The Ampair 600 is classed as a micro wind turbine, which is manufactured by Ampair. We are distributors of the Ampair company, and can provide the expertise when this is required. The 600w wind turbine has been developed in a similar way to the renowned Ampair 100 the newer Ampair 300 has a 1.7m diameter blade optimized for low and medium speed winds. It incorporates the Power furl balancing system which slows the turbine down in high winds, reducing noise and mounting system loads. It is available in several different versions depending on whether the need is for 24V battery charging, 28v battery charging, or for 230V grid connection. It can be used on land or in marine applications, All Ampair products, are built to full marine grade specifications, with fully interchangeable bearings, seals, and blades.
600w Wind Turbine Ampair
The Ampair 600-24 is a small wind turbine with 1.7m diameter blades that can be used with 24V DC battery systems. This battery charge version includes the turbine ‘head’ plus the regulator. It also needs an appropriate 24V battery bank to store the energy and suitable 24V loads.
The Ampair 600-230 is a small wind turbine with 1.7m diameter blades that can be used to feed power back into the 230V mains electrical supply, enabling the owner to purchase less power from their electricity supplier. This grid-tie wind turbine system includes the Ampair 600 turbine, and all of the necessary electronic equipment, such as the G83 inverter, isolations switches etc.
The Ampair 600 wind turbine
with the aid of trapeze fixings can be mounted onto a solid wall structure
or the Ampair 600 can be fitted to a tilt up mast. It is very adaptable being able to fix to most rigid structures such a steel frame. or a guyed mast. If you are considering a flat roof wind project we can offer the non penetrating fixing method of fixing the Ampair 600 wind turbine system.
24V DC (battery charge only)
48V DC (battery charge only)
230V AC (grid connect)
Referance power at 11.0m/s (24.6mph)
723W (into battery)
741W (into battery)
698W (into grid)
Referance annual energy at 5.0m/s
1300 kWh/yr
1394 Kwh/yr
1232 kWh/yr
Cut-in windspeed
3.0 m/s
3.0 m/s
3.0 m/s
Cut-out wind speed
n/a
n/a
n/a
Maximum power
1050W
1140W
730W
Maximum voltage
24V nominal
48V nominal
230V nominal
Maximum current
30A
17A
3.2A
Power form
24V DC
48V DC
230V AC 50Hz
Rotor swept area
2.27sq/m
Generator output
3-phase AC (to external rectifier)
Turbine Diameter
1.70m
Overspeed control
blade pitch control and dump load
Weight
16.0kg (turbine head including blades and tail fin)
Construction
powder coated die cast aluminium body; 3 blades of GRP construction
Generator
direct drive NeFeBr perminant magnet generator producing three phase
Dragons Breath and Johnathan Rowles, offer products & services as a SHARP PARTNER a full turn key service for any renewable energy product. Products exclude vat which will be charged at the prevailing rate, carriage not included. Payments can be made using the following: Credit cards, or Bacs. Our links to networking: TwitterFace book Mastervolt
